Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001BMY000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: 2UZ-FE COOLING: RADIATOR: REASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] REASSEMBLY 1. INSTALL NEW O-RING AND TANK (a) Check that there are no foreign objects in the lock plate groove, and install a new O-ring. Make sure the O-ring is not twisted. HINT: When cleaning the lock plate groove, lightly rub it with sandpaper without scratching it. (b) Install the tank without damaging the O-ring. (c) Tap the lock plate with a plastic-faced hammer so that there is no gap between the lock plate and the tank.
(d) Install the punch assembly to part A of the overhaul handle as shown in the illustration. SST: 09230-01010 09231-01010 09231-01020 (e) While gripping the handle, adjust the stopper bolt so that dimension B is as specified below. Dimension B: 8.4 mm (0.331 in.) 2. CAULK LOCK PLATE (a) Lightly press SST against the lock plate in the order shown in the illustration. After repeating this a few times, fully caulk the lock plate by squeezing the handle until stopped by the stopper bolt. cardi