B f l t t d th f th i gn (b) Coat a new oil seal lip with power steering fluid. (c) Using SST, press in the oil seal. SST: 09950-60010 09951-00280 09951-00360 09952-06010 SST: 09950-70010 09951-07100 NOTICE: Make sure to install the oil seal facing in the correct direction. 3. INSPECT BUSH (a) Check the inside of the bush of the cylinder end stopper for cracks. If the bush is faulty, replace the bush. (b) Apply molybdenum disulfide lithium base grease to the inside of the bush. 4. REPLACE BUSH (a) Using a screwdriver, remove the bush from the cylinder end stopper. NOTICE: Be careful not to damage the cylinder end stopper.
(b) Coat the inside a new bush with molybdenum disulfide lithium base grease. (c) Install the bush. 5. REPLACE TEFLON RING AND O-RING (a) Using a screwdriver, remove the teflon ring and O-ring from the steering rack. NOTICE: cardia