4. Motion Control Instructions 4.7.7. Flying Shear Technology Flying shear is the technology to cut the material in transmission vertically. The slave axis starts to accelerate from the wait position. After its speed is up to the synchronous speed, the follower of the lead screw and material move at the same speed; they are relatively static; the Insync bit is on and the shear axis is triggered to control the shear to do the cutting upward. The structure figure of flying shear is shown as follows.
Shear Material Lead screw Motor box Feed roller Motor Follower of lead screw DVP10MC11T Shear axis Slave axis Master axis After the cutting is completed, the shear will return to the motor box first and then slave axis will return to the wait position. In continuous cutting, these actions will be executed in cycles. The flying shear function is applied in cutting of the thick material usually. DVP-MC operating manual 4-171