lexus — Rear wiper and wash

: PARTS LOCATION : JUNCTION BLOCK AND WIRE HARNESS CONNECTOR : CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS 151 SYSTEM OUTLINE When the ignition SW is turned on, the current flows from WIPER fuse to washer motor TERMINAL 2, rear wiper relay TERMINAL 3 and TERMINAL 4 , and rear wiper motor TERMINAL 1 respectively. 1. REAR WIPER NORMAL OPERATION When the ignition SW is turned on, and the rear wiper and washer SW is turned to ON position, the current flows from rear wiper relay (Coil side) to instrument ECU TERMINAL (C) 3 to TERMINAL (A) 17 to rear wiper and washer SW TERMINAL 10 to TERMINAL 2 to GROUND, and turns on the rear wiper relay.

As a result, the current flows from rear wiper relay TERMINAL 3 to TERMINAL 2 to rear wiper motor TERMINAL 3 to TERMINAL 2 to GROUND, and operates the rear wiper. 2. REAR WIPER INTERMITTENT OPERATION When the ignition SW is turned on, and the rear wiper and washer SW is turned to INT position, the current flows from rear wiper relay (Coil side) to instrument ECU TERMINAL (C) 3 to TERMINAL (A) 16 to rear wiper and washer SW TERMINAL 13 to TERMINAL 2 to GROUND, and the intermittent circuit in the instrument ECU is controlled to operate the wiper intermittently. 3.

WASHER OPERATION When the ignition SW is turned on, and the rear wiper and washer SW is turned from OFF to WASH position, the current flows from the WIPER fuse to washer motor TERMINAL 2 to TERMINAL 3 to rear wiper and washer SW TERMINAL 12 to TERMINAL 2 to GROUND. This activates the washer motor, and the window washer emits a water spray. When the rear wiper and washer SW is turned to ON position, the window washer emits a water spray during rear wiper normal operation. SYSTEM OUTLINE SERVICE HINTS W1 WASHER MOTOR 2–GROUND : Approx. 12 volts with ignition SW at ON or ST position 3–GROUND : Continuity with rear wiper and washer SW at WASH position R28 REAR WIPER MOTOR 1–GROUND : Approx.

12 volts with ignition SW at ON or ST position 2–GROUND : Always continuity SERVICE HINTS Code See Page Code See Page Code See Page C21 40 J20 41 R29 43 I19 A 40 J32 42 W1 39 I21 C 40 R28 43 Code See Page Junction Block and Wire Harness (Connector Location) 1A 23 Engine Room No.

2 Wire and Engine Room J/B (Engine Compartment Left) 1C 1H 23 Engine Room Main Wire and Engine Room J/B (Engine Compartment Left) 2F 26 Engine Room No.2 Wire and Cowl Side J/B LH (Left Kick Panel) 2O 26 Floor Wire and Cowl Side J/B LH (Left Kick Panel) 2P 28 Instrument Panel Integration Wire and Cowl Side J/B LH (Left Kick Panel) Code See Page Joining Wire Harness and Wire Harness (Connector Location) IH1 50 Instrument Panel Integration Wire and Column Wire (Near the Ignition SW) IH2 BK1 58 Pillar No. 1 Wire and Back Door Upper Wire (Left Side of Back Door) BK2 BS1 58 Luggage Room Wire and Floor Wire (Left Rear Side Quarter Panel) BS2