Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000018T5005X agn Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 - ] Title: AIR CONDITIONING: AIR CONDITIONING CONTROL ASSEMBLY: REMOVAL; 2007 MY LX470 [08/2006 - ] REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. HINT: At the time of installation, perform initialization . NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal. 2.
REMOVE CENTER CLUSTER FINISH PANEL (a) Disengage the 9 clips and remove the center cluster finish panel, and then disconnect the connector. 3. REMOVE CENTER RESISTOR (a) Disengage the 6 clips and remove the center resistors in both sides. 4. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY (a) Remove the 4 bolts. (b) Disengage the 7 clips and remove the integration control panel assembly, and then disconnect the connectors. 5. REMOVE A/C AMPLIFIER ASSEMBLY (w/ Navigation System) (a) Disconnect the connector clamp. (b) Remove the 3 screws, 4 bolts and radio receiver bracket LH. cardi