HP — Duplex feed unit

Duplex feed unit During 2-sided (duplex) printing, the duplex feed unit retrieves the paper from the output bin and sends it back through the pickup/feed unit to print on the second side. The sequence of events is as follows: 1 The paper, with the front side printed, passes through the fuser. 2 The fuser motor (M8) rotates counterclockwise for a specified length of time after the paper reaches the fuser delivery sensor. The fuser delivery roller reverses direction and feeds the paper into the duplex feed unit. Figure 5-37 illustrates this "switch back" operation.

3 The oblique roller and feed roller allow the left edge of the paper to contact the left-side plate in order to align the paper on the left margin. 4 The paper then re-enters the pickup/feed unit and is printed on the second side. 5 The paper passes through the fuser a second time and comes to rest in the output bin. Note During duplex printing, the printer prints the second side of the page first. For instance, if a 4-page print job is to be printed on two sheets of paper, pages 2 and 4 print first, then pages 1 and 3 print. For this reason, when duplex printing on pre-printed letterhead, be sure to load the letterhead face-down in Tray 2 or Tray 3, and load letterhead face-up in Tray 1.

Figure 5-37 Duplex switch back C9660-90901 Chapter 5 Theory of operation 133