Pickup and feed operations The sequence of operations for the 500-sheet paper feeder follows. Figure 5-39 illustrates this sequence. 1 The DC controller receives a print command from the formatter and sends a pickup command to the paper feeder driver. 2 The paper feeder driver rotates the main motor (M4001) in the paper feeder, and the feed roller starts to rotate. 3 After the printer enters the SCANNER READY state, the DC controller instructs the paper feeder driver to pick a sheet of paper. The paper feeder pickup solenoid (SL4001) turns on. The pickup roller makes one rotation and picks up paper in the paper feeder.
4 Separation tabs eliminate any multiple-fed sheets, and a single piece of paper enters the feed path. Figure 5-39 500-sheet paper feeder pickup and feed operation C9660-90901 Chapter 5 Theory of operation 135