Required tools Before servicing the printer, gather the following tools: G Phillips #2 magnetized screwdriver (152-mm [6-inch] shaft) G Small flat-blade screwdriver G Small needle-nose pliers G ESD strap G Penlight (optional) All components in the HP Color LaserJet 4600 series printer use Phillips-head screws that require a #2 Phillips screwdriver. Ensure that you have a Phillips screwdriver and not a Posidriv screwdriver. Figure 6-1 (below) shows the difference between a Phillips and a Posidriv screwdriver. Note that the Phillips tip has more beveled surfaces. Figure 6-1 Phillips and Posidriv screwdriver comparison 140 Introduction C9660-90901