Right cover To remove the right cover 1 Remove the rear cover. See page 144. 2 Remove the top cover. See page 145. 3 Remove the rear top cover. See page 146. 4 Open the front cover. 5 Remove the screw shown in callout 1. 6 Disengage the two tabs shown in callout 2. 7 Tilt the top of the right cover away from the printer and remove it. Reinstallation tip When reinstalling the right cover, be sure to insert the two hooks that are along the bottom edge of the cover into the holes in the printer frame. 1 2 Figure 6-10 Removing and replacing the right cover 150 Covers and external components C9660-90901