HP — Front cover

Front cover To remove the front cover 1 Remove the multi-purpose tray. See page 152. 2 Unhook the two spring rods shown in callout 1. CAUTION The rods are under spring tension. Use caution when removing them. Tilt the tray up slightly to lessen the spring tension, making the rods easier to remove. 3 Press outward on the tray near the spring rods and remove the tray. 1 2 Figure 6-12 Removing and replacing the multi-purpose tray Reinstallation tip Make sure the rods are inserted through their guides in the printer frame (callout 2) when reinstalling the multi-purpose tray. 152 Covers and external components C9660-90901