Reinstallation tip When reinstalling the developing disengaging rod, be sure to rotate the white gear (located between the black and magenta drum drive units) fully clockwise until it comes to a complete stop, as indicated in callout 4 below. Also make sure the developing disengaging rod passes through the slots in the drive clutches (in the up position) in each of the four drum drive units, engaging each clutch. The clutch on the yellow drum drive unit is particularly difficult to see and engage properly. 4 Figure 6-31 Reinstalling the developing disengaging rod (1 of 2) 5 Figure 6-32 Reinstalling the developing disengaging rod (2 of 2) C9660-90901 Chapter 6 Removal and replacement 165