HP — Fuser power supply PCB

Internal components (top) Fuser power supply PCB To remove and replace the fuser power supply PCB 2 Remove the top cover. See page 145. 1 Remove the rear cover. See page 144. 3 Remove the rear top cover. See page 146. 4 Disconnect the connector J203 shown in callout 1. 5 Unthread the cable shown in callout 2 from the fuser power supply cover. 6 Remove the screw shown in callout 3, and then remove the fuser power supply cover (callout 4). 7 Remove the two screws shown in callout 5, and using needle-nose pliers remove the four clips shown in callout 6. 8 Disconnect the four connectors shown in callout 7, and remove the fuser power supply PCB. 190 Internal components (top) C9660-90901