Fuser inlet paper sensor To remove the fuser inlet paper sensor 1 Remove the rear cover. See page 144. 2 Remove the top cover. See page 145. 3 Remove the rear top cover. See page 146. 4 Remove the fuser. See page 82. 5 Unhook the two tabs shown in callout 1 (they are on the front of the sensor). 6 Disconnect the connector directly in front of those tabs (this connector is hidden in the picture). 7 Remove the fuser paper sensor. 1 Figure 6-66 Removing and replacing the fuser paper sensor 194 Internal components (top) C9660-90901