Paper feeder drive unit To remove the 500-sheet paper feeder drive unit 1 Remove the top plate from the 500-sheet paper feeder (see page 199), and turn it upside- down. 2 Remove the spring and the E-ring indicated by callout 1. 3 Unhook the tab in the center of the gear indicated by callout 2, and remove the gear. 4 Disconnect the three connectors indicated by callout 3 (two of these connectors are on the paper feeder PCB). 5 Remove the cables from the cable clips. 6 Remove the two screws shown in callout 4, and slide the drive unit out.
2 3 1 4 Figure 6-72 Removing and replacing the paper feeder drive unit, top view (1 of 2) 3 Figure 6-73 Removing and replacing the paper feeder drive unit, side view (2 of 2) 200 Optional 500-sheet paper feeder C9660-90901