HP — Troubleshooting power-on

Troubleshooting power-on When you turn on the printer, if it does not make any sound or if the control panel display is blank, check the following items: 1 Verify that the printer is plugged into an active electrical outlet with the correct voltage. 2 Verify that the on/off switch is in the ON position. 3 Make sure the rear fan is running, indicating the system is operational. 4 Verify that the firmware DIMM and the formatter are seated and operating properly. 5 Remove any HP Jetdirect or other EIO cards, then try to turn the printer on again. 6 Make sure the control panel display is connected. 7 Check the fuses in the power supply. 8 If necessary, replace the power supply.

9 If necessary, replace the DC controller. 210 Troubleshooting process C9660-90901