HP — Print quality problems associated with media

Image formation troubleshooting The image formation system is the central hub of the printer. During image formation, an image of colored toner is formed and then fused onto the paper. The image formation system consists of the following physical components: G four laser/scanners G four print cartridges G ETB G fuser Before beginning image formation troubleshooting, check that the media meets the specifications listed in the HP LaserJet Printer Family Print Media Guide. Print quality problems associated with media Some print quality problems arise from use of inappropriate media. G Use paper that meets HP paper specifications. See “Supported media specifications” on page 29.

G The surface of the media is too smooth. Use media that meets HP paper specifications. See “Supported media specifications” on page 29. G The driver/printer is set incorrectly. Change the paper type setting to heavy or glossy . G The media you are using is too heavy for the printer, and the toner is not fusing to the media. G The transparencies you are using are not designed for proper toner adhesion. Use only transparencies designed for HP Color LaserJet printers. G The moisture content of the paper is uneven, too high, or too low. Use paper from a different source or from an unopened ream of paper. G Some areas of the paper reject toner.

Use paper from a different source or from an unopened ream of paper. G The letterhead you are using is printed on rough paper. Use a smoother, xerographic paper. If this solves your problem, consult with the printer of your letterhead to verify that the paper used meets the specifications for this printer. G The paper is excessively rough. Use a smoother, xerographic paper. 246 Image formation troubleshooting C9660-90901