Adjusting color balance This printer features automatic color calibration to provide high-quality color output. In situations that require critical color control, you can manually adjust the density balance of the printer’s four toner colors. The available range for each color is from -5 to +5. The default value is 0. CAUTION This procedure should only be performed by your network administrator. Performing this procedure changes the color balance of the printer by altering halftones and affects all print jobs. To adjust color density 1 Press to enter the MENUS . 2 Press to highlight CONFIGURE DEVICE MENU . 3 Press to select CONFIGURE DEVICE MENU . 4 Press to highlight PRINT QUALITY .
5 Press to select PRINT QUALITY . 6 Press or to highlight ADJUST COLOR . 8 Press or to highlight the correct density setting. 7 Press or to highlight the desired color. 9 Press to select the density setting. 10 Press to set the density for the next color. 11 After setting the density for each color, press P AUSE /R ESUME . 252 Image formation troubleshooting C9660-90901