System setup menu The System setup menu allows you to make changes to general printer configuration default settings such as PowerSave Time, printer personality (language), and jam recovery. Table 7-42 System setup submenu C9660-90901 Chapter 7 Troubleshooting 271 Menu item Values Description JOB STORAGE LIMIT 1-100 Sets the limit for the maximum number of jobs stored on the hard disk at the printer. JOB HELD TIMEOUT OFF 1 HOUR 4 HOURS 1 DAY 1 WEEK Sets the period of time that the system keeps files in job storage before deleting them from the queue. COLOR/MONO MIX = AUTO MOSTLY COLOR PAGES MOSTLY BLACK PAGES AUTO will reset the printer to the factory default setting, which is MOSTLY COLOR.
MOSTLY COLOR PAGES will exhibit the NEVER SWITCH behavior to maximize performance. MOSTLY BLACK PAGES will exhibit the LOOK AHEAD FIRST behavior to improve cost per page as much as possible while minimizing impact to performance. TRAY BEHAVIOR USE REQUESTED TRAY MANUALLY FEED PROMPT Allows you to specify settings for the tray selection behavior. (This setting allows you to configure the trays to behave like trays in some previous HP printers.) POWERSAVE TIME 1 MINUTE 5 MINUTES 30 MINUTES 1 HOUR 2 HOURS 4 HOURS Reduces power consumption when the printer has been inactive for an extended period.
PERSONALITY AUTO PCL PS Sets the default personality to automatic switching, PCL, or PostScript emulation. CLEARABLE WARNINGS ON JOB Sets whether a warning is cleared on the control panel or when another job is sent. AUTO CONTINUE ON OFF Determines printer behavior when the system generates an auto continuable error. SUPPLIES LOW CONTINUE STOP Sets low supplies reporting options. JOB STORAGE LIMIT 1-100 Sets the limit for the maximum number of jobs stored on the hard disk at the printer. JAM RECOVERY AUTO ON OFF Sets whether the printer will attempt to reprint pages after a jam. LANGUAGE A list of available languages appears. Sets the default language.