Service menu The Service menu is PIN protected for added security. Only authorized service people have access to the service menu. When you select SERVICE from the list of menus, you are prompted to enter your 8-digit PIN number. The PIN for this printer is 04460002. 2 Press to save the digit. The display will replace the digit with an asterisk. 1 Press or until the first digit of the PIN is displayed. 3 Repeat steps 1 and 2 until all eight digits are entered. 4 Press at any time to move to the previous digit. Use the Service menu to reset counts, clear the event log, enter the serial number, enter the date the printer was first used, and reset the default paper size.
Table 7-46 Service menu 274 Control panel troubleshooting C9660-90901 Menu item Values Description CLEAR EVENT LOG Allows you to clear the printer’s internal event log TOTAL PAGE COUNT Range: 0 - 9999999 Allows you to reset the page count after replacing the formatter. The page count should reflect the number of pages printed on the print engine rather than the formatter. TRANSFER KIT COUNT Range: 0 - 9999999 (120,000 is the maximum number of pages the transfer unit can print) Allows you to reset the page count of the current transfer unit if the value is lost.
This item automatically resets to zero when the transfer unit is replaced and the user selects the choice to reset the transfer count. FUSER KIT COUNT Range: 0 - 9999999 (150,000 is the maximum number of pages the fuser can print) Allows you to reset the page count of the current fuser if the value is lost. This item automatically resets to zero when the fuser is replaced and the user selects the choice to reset the fuser count. SERIAL NUMBER XXXXXXXXXX Allows you to update the serial number if you replace the formatter.
SERVICE ID YYDDD If you replace the formatter, this item allows you to set the date to the date the printer was first used, rather than the date the new formatter was installed. See “Service ID” on page 296 for information on the date format. COLD RESET PAPER LETTER A4 If the customer uses default paper size of A4 (used in Europe), this item allows you to reset the default if you replace the formatter.