Safety information Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since 1 August 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a “Class 1” laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation. WARNING!
Using controls, making adjustments, or performing procedures other than those specified in this guide may result in exposure to hazardous radiation. Material Safety Data Sheet Material Safety Data Sheets (MSDS) can be obtained by contacting the HP LaserJet Supplies website at http://www.hp.com/go/msds . Toner safety Hewlett-Packard encourages responsible disposal of HP LaserJet printer supply items through its Environmental Collection Program. For details on this program, see the recycling instruction guide enclosed with each supply item. Note In case of toner spills, skin and clothing are best cleaned by removing as much toner as possible with a dry tissue, then washing with cold water.
Hot water causes toner to permanently set into clothing. Canadian DOC regulations Complies with Canadian EMC Class B requirements. «Conforme б la classe B des normes canadiennes de compatibilitй йlectromagnйtiques. «CEM».» » EMI statement (Korea) Figure 1-7 EMI statement for Korea C9660-90901 Chapter 1 Printer description 39