HP — UNIX/Linux networks

Windows and Windows NT networks For Windows 95, 98, ME, NT 4.0, 2000, and XP systems, use your printer installation utility for printer setup on a Microsoft Windows network. The utility supports printer setup for either peer-to-peer or client-server network operation. AppleTalk networks Use the HP LaserJet Utility to set up the printer on an EtherTalk or LocalTalk network. For more information, refer to the HP Jetdirect Print Server Administrator’s Guide included with printers equipped with the HP Jetdirect print server.

LocalTalk configuration The LocalTalk interface enables you to print directly from a stand-alone Apple Macintosh computer or from a Macintosh computer on a LocalTalk network. For specific information on configuring the computer and printer to print through a LocalTalk interface, refer to the printer’s getting started guide and the HP Jetdirect Print Server Administrator’s Guide . Note For LocalTalk configuration, the DIN-8 printer cable must be connected to the printer port of the Macintosh computer. LocalTalk network configuration To connect the printer to a Macintosh computer on a LocalTalk network, use the HP LocalTalk Cable Kit.

You will need a kit for each printer and an additional kit for each Macintosh computer on the network. UNIX/Linux networks Use the HP Jetdirect printer installer for UNIX utility to set up the printer on HP-UX or Sun Solaris networks. For setup and management on UNIX or Linux networks, use HP Web Jetadmin. To obtain HP software for UNIX/Linux networks, visit HP Customer Care online at http://www.hp.com/support/net_printing . For other installation options supported by the HP Jetdirect print server, see the HP Jetdirect Print Server Administrator’s Guide included with printers equipped with the HP Jetdirect print server. C9660-90901 Chapter 3 Installation and configuration 65