Network configuration Configuring the printer for the network You can configure certain network parameters on the printer from the printer control panel or, for most networks, from the HP Web Jetadmin software (or the HP LaserJet Utility for Macintosh). The utilities are provided on the printing software CD-ROM that comes with the printer. You can also set these parameters from the HP Web Jetadmin software, which is available at http://www.hp.com/go/webjetadmin . For a complete list of supported networks and for instructions on configuring network parameters from software such as HP Web Jetadmin, see the HP Jetdirect Print Server Software Installation Guide.
The guide comes on the CD-ROM with printers in which an HP Jetdirect 610N print server is installed. Configuring Novell NetWare frame type parameters The HP Jetdirect 610N print server automatically selects a NetWare frame type. Select a frame type manually only when the print server selects an incorrect frame type. To identify the frame type chosen by the HP Jetdirect 610N print server, print a configuration page. 68 Network configuration C9660-90901