Installing memory and font DIMMs You can install more memory for the printer, and you can also install a font DIMM to allow the printer to print characters for languages such as Chinese or the Cyrillic alphabet. CAUTION Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch bare metal on the printer. 1 Turn the printer off, and disconnect all power and interface cables. Locate the formatter board in the rear of the printer. 2 Remove the eight screws holding the board in place, and set them aside. 3 Slide out the formatter board and set it on a clean, flat, grounded surface.
4 Release the locks on each side of the DIMM slot. 5 Remove the DIMM from the antistatic package. Locate the alignment notches on the bottom edge of the DIMM. C9660-90901 Chapter 4 Printer maintenance 85