© Siemens AG 2010 BETA Protecting SITOR Semiconductor Fuses SITOR, LV HRC design Overview Benefits SITOR fuses protect power semiconductors from the effects of a short circuit because the super-quick disconnect characteristic is far quicker than that of conventional LV HRC (NH type) fuse systems. They protect expensive devices and system compo- nents such as converters with fuses in the input and in the DC link, UPS systems and soft starters for motors. SITOR fuses have a high varying load factor, which ensures a high level of operational reliability and plant availability - even when subject to constant load change.
The use of SITOR fuses in LV HRC fuse bases or Siemens switch disconnectors has been tested with regard to heat dis- sipation and maximum current loading. This makes planning and dimensioning easier and prevents consequential dam- age. Our high standard of quality ensures good compliance with the characteristic curve and accuracy. This ensures long-term protection of devices. Panel mounting requirements have given rise to various connec- tion versions and designs. The fuses with blade contacts comply with IEC 60269-2 and are suitable for installation in LV HRC fuse bases, in LV HRC fuse switch disconnectors and in switch disconnectors with fuses.
They also include fuses with slotted blade contacts for screw fix- ing with 110 mm mounting dimension, whose sizes comply with IEC 60269-4. Operational classes Fuses with slotted blade contacts for screw fixing with 80 mm or 110 mm mounting dimension are often screwed directly onto busbars for optimum heat dissipation. Even better heat transmis- sion is provided by the compact fuses with M10 or M12 female thread, which are also mounted directly onto busbars. Fuses are categorized according to function and operational classes. SITOR semiconductor fuses, in LV HRC design, are available in the following operational classes: aR:
for the short-circuit protection of power semiconductors (partial range protection) gR: for the protection of power semiconductors (full range protection) gS: The gS operational class combines cable and line protec- tion with semiconductor protection (full range protection). Bolt-on links with 80 mm mounting dimension are another panel- mounting version for direct busbar mounting. The fuses for SITOR thyristor sets, railway rectifiers or electroly- sis systems were developed specially for these applications. To find out which LV HRC fuse bases and safety switching de- vices can be used with the SITOR fuses, please refer to the chapter "Low-voltage fuse systems".
Fuse characteristic curves, configuration notes and the assign- ment of SITOR fuses to 3NP and 3KL fuse bases and safety switching devices can be found in catalog ET B1 Add-On Fuse Characteristic Curves and Configuration Notes and on the Inter- net. The new type ranges for size 3 have a round rather than square ceramic body. These series are characterized by small I Іt values with low power dissipation and high capability under alternating load. The dimensions and functional dimensions correspond to the current standards IEC 60269-4/EN 60269-4 (VDE 0636-4). Note: The ordering data of the fuses are listed in ascending order of the rated voltage in the selection tables.
19 19/101 Siemens LV 1 · 2010