© Siemens AG 2010 BETA Protecting Overvoltage Protection Devices Surge arresters for measuring and control technology Overview Benefits The new surge arresters for measuring and control technology are overvoltage protection modules, which comprise one basic element and one male connector, i. e. two components. Their application area is the protection of signal circuits. The two-component design offers users maximum mainte- nance convenience. The basic element is always a fixed inte- gral part of the installation. No laborious interventions, e. g. in the case of repair work The benefits:
- Two-component design, comprising one male connector and one basic element - Interruption-free and impedance neutral plugging in and pulling out of the male connector - Reverse polarity protection through mechanical encoding - Surge current carrying capable contacting to standard mounting rail thanks to snap-on technique – no further labo- rious wiring of the reference potential. The arrangement of suppressor diodes between signal cores achieves a fine protection in connection with a fast response. The low capacitive coupling of the suppressor diodes to the signal cores enables high data transmission rates The use of gas-filled surge arresters ensures a high discharge capacity.
The cable shields of basic elements can be either directly or in- directly grounded. The mounting width of the new surge arresters is 1 MW. Through the number of integrated paths, it is possible to protect up to four signal cores or two twin-wires against overvoltages. 19 19/129 Siemens LV 1 · 2010