Siemens — Siemens BETA Low-Voltage Circuit Protection Manual

© Siemens AG 2010 BETA Protecting Residual Current Protective Devices Busbars Overview 4-pole 5SM3 RCCBs are bus-mounted either together or in com- bination with miniature circuit breakers. RCCBs with an N con- ductor connection on the left-hand side facilitate installation be- cause normal busbars are used, as for miniature circuit breakers. No further need for time-consuming tasks, such as cutting, cut- ting to length, deburring, cleaning of cut surfaces and mounting of end caps. Busbars are available in 10 mm 2 and 16 mm 2 . Any free pins on the busbars can be made finger-safe by cover- ing with touch protection.

The extremely flexible 5ST3 6 busbar system with fixed lengths enables installation in any length as the busbars can be over- lapped. If several RCBOs are bus-mounted together, this is implemented with two-phase busbars, which are used as 1+N busbars. Benefits Connection of miniature circuit breakers to 4-pole RCCBs with N-connection right with three-phase busbar, using busbar specially designed for this application. No cutting or end caps required. Connection of miniature circuit breakers to 4-pole RCCBs with N-connection left with three-phase busbar that can be cut. No additional items to be stored and busbars that are always available. Connection of 1P+N RCBOs with two-phase busbar.

No cut- ting or end caps required. Bus mounting of RCCBs on busbar (three-phase +N) that can be cut. A proven and frequently used application 19 19/61 Siemens LV 1 · 2010