STARTING AND DRIVING depress the brake pedal lightly for several times to dry the brake. Without depressing the brake pedal, the ignition mode will change as follows: VESPER Driving vehicles should abide by local laws and regulations and designated traffic regulations, always keep safe driving in mind. 1 Ignition mode 0: Unlock the vehicle and open the driver door. A certain number of electrical functions can be used in this mode within a limited time period. The clock and position lights can be used. 2Ignition mode I: With the remote key detected, press and release the START/STOP ENGINE to change to mode I from 0. Certain convenience functions work, such as the center display.
3Ignition mode II: With the remote key detected, press and release the START/STOP ENGINE to change to mode II from I. Both headlights and fog lights can be used. The system performs a self-test in seconds; most electrical equipment can be used in this mode. Ignition mode ■ If the electric equipment is still used after the engine is shut down, the battery power will be consumed. If the battery is discharged, the vehicle can not be started. ■ After vehicle flameout, if the ignition switch is in Ignition mode I or Ignition mode II and the shift lever is in P gear, the ignition switch will automatically switch to Ignition mode 0 after 30 minutes to avoid excessive battery power consumption.
Caution! Note! The pictures are only for illustration, please refer to the actual vehicle. Starting the vehicle You can start it via the button in the car or remotely. Different electrical systems are used in different modes and different functions are available in each mode. 158