MAINTENANCE AND SERVICE a flat and level road surface, it may be necessary to rebalance the tires and wheels. If the tires are fitted incorrectly, the vehicle's braking characteristics and ability to force water and slush out of the way are adversely affected. VESPER After a wheel is fitted with a new tire or a tire is repaired, make sure the wheel is measured and tested for dynamic balance. Warning! Warning! ■ After tire transposition, check and adjust the tire pressure. Improper tire pressure may adversely affect tire life and vehicle handling, resulting in a loss of control of the vehicle. ■ The wheel bolts must be tightened to the correct specification at all times.
Otherwise, accidents may occur. Special equipment and skills are required for wheel dynamic balancing. If you need to check the wheel dynamic balance, go to a Lynk & Co Center. Tire transposition Tread wear indicators Tread wear indicators show the status of the tire's tread depth. Tires should only be transposed between front and rear positions, never between left and right sides. A tread wear indicator is a narrow elevation across the longitudinal grooves of the tire's tread pattern. On the side of the tire are the letters or icons of tread wear indicator. When the tread becomes 265