User’s Guide Troubleshooting for Printing Paper is not ejected fully or is wrinkled ❏ If the paper does not eject fully, press the + button to eject the paper. If the paper is jammed inside the product, remove it by referring to the following section. & “Paper Jams” on page 50 ❏ If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack of paper. Note: Store any unused paper in its original packaging in a dry area. The Product Does Not Print All lights are off ❏ Press the P button to make sure the product is on. ❏ Make sure that the power cord is securely plugged in. ❏ Make sure that your outlet works and is not controlled by a wall switch or timer.
Only the power light is on ❏ Turn off the product and computer. Make sure the product’s interface cable is securely plugged in. ❏ If you are using the USB interface, make sure your cable meets the USB or Hi-Speed USB standards. ❏ If you are connecting the product to your computer via a USB hub, connect the product to the first-tier hub from your computer. If the printer driver is still not recognized on your computer, try to directly connect the product to your computer without the USB hub. ❏ If you are connecting the product to your computer via a USB hub, make sure the USB hub device is recognized by your computer.
❏ If you are trying to print a large image, your computer may not have enough memory. Try reducing the resolution of your image or printing the image at a smaller size. You may need to install more memory in your computer. ❏ Users of Windows can clear any stalled print jobs from the Windows Spooler. & “Canceling printing” on page 22 ❏ Uninstall the printer driver, then reinstall it. & “Uninstalling Your Software” on page 45 58