Device# configure terminal Device(config)# ip rcmd remote-username netadmin2 Device(config)# end Device# copy nvram:startup-config rcp: Remote host[]? 172.16.101.101 Name of configuration file to write [start-confg]? Write file start-confg on host 172.16.101.101?[confirm] ![OK] What to Do Next After you have issued the copy EXEC command, you may be prompted for additional information or for confirmation of the action. The prompt displayed depends on how much information you provide in the copy command and the current setting of the file prompt global configuration command.
Copying a Configuration File from the Device to the FTP Server To copy a startup configuration file or a running configuration file from the device to an FTP server, complete the following tasks: Procedure Managing Configuration Files What to Do Next Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode on the device. Step 3 ip ftp username username Example: Device(config)# ip ftp username NetAdmin1 (Optional) Specifies the default remote username. Step 4 ip ftp password password Example:
Device(config)# ip ftp password adminpassword (Optional) Specifies the default password. Managing Configuration Files 13