Examples The following example stores the configuration file in usbflash0: Device# copy nvram:startup-config usbflash0:switch-config Device# configure terminal Device(config)# boot config usbflash0:switch-config Device(config)# end Device# copy system:running-config nvram:startup-config Loading the Configuration Commands from the Network To use a network server to store large configurations, complete the tasks in this section: Procedure Managing Configuration Files Loading the Configuration Commands from the Network Command or Action Purpose Step 7 copy system:running-config nvram:startup-config Example:
Device(config)# copy system:running-config nvram:startup-config When you have finished changing the running-configuration, save the new configuration. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 copy system:running-config {ftp: | rcp: | tftp:} Example: Device# copy system:running-config ftp: Saves the running configuration to an FTP, RCP, or TFTP server. Step 3 configure terminal Example: Device# configure terminal Enters global configuration mode. Managing Configuration Files 22