Copying a Configuration File from a TFTP Server to Flash Memory Devices To copy a configuration file from a TFTP server to a flash memory device, complete the tasks in this section: Procedure Managing Configuration Files Copying a Configuration File from a TFTP Server to Flash Memory Devices Command or Action Purpose Example: Device> enable • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal (Optional) Enters global configuration mode. This step is required only if you override the default remote username or password (see Step 3). Step 3 ip rcmd remote-username username Example:
Device(config)# ip rcmd remote-username Admin01 (Optional) Specifies the remote username. Step 4 end Example: Device(config)# end (Optional) Exits configuration mode. This step is required only if you override the default remote username or password (see Step 3). Step 5 copy rcp: [[[//[username@]location ]/directory] /bundle name] flash: _ Example: Device# copy rcp://netadmin@172.16.101.101/bundle1 flash: Copies the configuration file from a network server to the flash memory device using RCP. Respond to any device prompts for additional information or confirmation. Prompting depends on how much information you provide in the copy command and the current setting of the file prompt command.
Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 copy tftp: [[[//location ]/directory ]/bundle name flash: _ Example: Device# copy Copies the file from a TFTP server to the flash memory device. Reply to any device prompts for additional information or confirmation. Prompting depends on how much information you provide in the copy command and the current setting of the file prompt command. Managing Configuration Files 27