COMPONENT LOCATION Volume 2 of 3 - PLATFORM AND CONSOLE AREA Machine locations are repeated for components located close together. A = Located inside of cab, operator's platform B = Located inside of right console. G = Located under operator's platform C = Located inside of left console.
D = Located inside cab at rear J = Located in operator's seat Component Schematic Location Machine Location Component Schematic Location Machine Location Converter- 12v-7a 1 (atch) D-4 G Switch- Horn E-3 C Converter- 12v-7a 2 (atch) D-4 G Switch- Idle- One Touch Low C-3 B Diode- Accessory C-7 G Switch- Joystick- Left Hand 3 (atch) F-3 C Diode- Hyd Lock C-7 G Switch- Joystick- Right Hand 3 (atch) C-3 B Ground- Frame 7 F-12 G Switch- Key B-2 B Ground- Platform E-9 G Switch- Neutral Start Limit F-3 C Heater - Seat (atch) C-4 J Switch- Pressure- Aux Pump (atch) E-1 G Indicator- Unit B-2 B Switch- Pressure- High (atch) D-1 G Joystick- Left Hand (atch) E-3 C Switch- Pressure- Medium (atch) E-1 G Joystick- Right Hand (atch) C-3 B Switch- Pressure- Travel Left D-1 G Key Reader- Mss (atch) C-3 B Switch- Pressure- Travel Right D-1 G Switch- Aux Pedal (atch) E-1 A Switch- Pressure-travel Straight (atch) D-1 G Switch- Backup Epr Valve A-4 B Switch- Secondary Shutdown A-11 G Switch- Backup Governor B-4 B Switch- Throttle Position B-2 G Switch- Exciter Coil (atch) C-2 B