4. DISASSEMBLY, INSPECTION AND REASSEMBLY OF ENGINES 4.4 Cylinder Block 4.4.1 Components 4.4.2 Disassembly procedure: Disassemble in the order of the numbers in the illustration. 1) Perform steps 1) to 12) in the cylinder head disassembly procedure. 2) Perform steps 1) to 12) in the gear train disassembly procedure. 3) Remove the oil pan. (See Point 1 of 4.4.4) 4) Remove the lubricating oil suction pipe. 5) Remove the piston and connecting rod. (See Point 2 of 4.4.4) 6) Remove the flywheel housing. (See Point 3 of 4.4.4) 7) Remove the bearing metal caps. (See Point 4 of 4.4.4) 8) Remove the crankshaft. (See Point 5 of 4.4.4) 9) Remove the tappets. 10) Remove the pistons and rings.
(See Point 6 of 4.4.4) 11) Remove the oil seal from the flywheel housing. (See 4.4.8) 4.4.3 Reassembly procedure: Reverse of the disassembly procedure. 82E-5 – 98E-5 SERIES 4-33 (2)