FLENDER Standard Couplings Torsionally Rigid All-Steel Couplings — ARPEX ARP-6 Series © Siemens AG 2015 Type MCECM 6 Hubs are designed with threaded pull-off holes. E spacers are also available in the following inch dimensions on request: S = 3.5"/5"/7"/8"/10". Other spacer lengths are available on request. Plate packs in the CEC intermediate unit assembled at the factory. Jumbo hub for large shaft diameters. Ordering example: ARPEX ARP-6 MCECM coupling, size 120-6, with shaft distance S = 140 mm, Bore ∅ D1 50H7 mm, with keyway to DIN 6885 and set screw, Bore ∅ D2 60K7 mm, with keyway to DIN 6885 and set screw. Article No.:
2LC0460-2AP99-0AB0-Z L1C+M1E+M13 Weights and mass moments of inertia apply to the entire coupling with maximum bores D1/D2. 6/44 Siemens MD 10.1 · 2015 Size Rated torque Maxi- mum speed Type Dimensions in mm Mass moment of inertia Article No. Weight Shaft dis- tance Order codes for bore diameters and tolerances are specified in catalog section 3 DA TKN nKmax D1/D2 ND1 ND2 DZ SZ NL1/ NL2 S1 BF A P S LG J m Keyway DIN 6885 mm Nm rpm max. max.
kgm2 kg 275-6 9800 6250 MCECM 150 150 213 213 148 12.6 150 20 40 – – 200 500 250 550 185 150 275 213 16 200 200 500 250 550 185 185 275 275 200 500 250 550 0.917 2LC0461-0AP ■ ■ -0AD0 91.1 0.927 2LC0461-0AP ■ ■ -0AE0 93.3 JCECM 1.207 2LC0461-0AH ■ ■ -0AD0 104.4 1.217 2LC0461-0AH ■ ■ -0AE0 106.5 JCECJ 1.499 2LC0461-0AG ■ ■ -0AD0 118.0 1.509 2LC0461-0AG ■ ■ -0AE0 120.1 310-6 12900 5550 MCECM 170 170 240 240 160 13.5 170 22 47 – – 250 590 205 170 310 240 16 220 205 205 310 310 1.670 2LC0461-1AP ■ ■ -0AE0 131.7 JCECM 2.228 2LC0461-1AH ■ ■ -0AE0 153.2 JCECJ 2.788 2LC0461-1AG ■ ■ -0AE0 175.0 345-6 17000 5000 MCECM 190 190 267 267 172 18.5 190 24 47 – – 250 630 230 190 345 267 20 245 230 230 345 345 2.742 2LC0461-2AP ■ ■ -0AE0 176.1 JCECM 3.684 2LC0461-2AH ■ ■ -0AE0 205.1 JCECJ 4.629 2LC0461-2AG ■ ■ -0AE0 234.3 ∅D1:
• Without finished bore – Without order codes 1 • With finished bore – With order codes for diameter and tolerance (article number without "-Z") 9 ∅D2: • Without finished bore – Without order codes 1 • With finished bore – With order codes for diameter and tolerance (article number without "-Z") 9