© Siemens AG 2015 FLENDER Standard Couplings Coupling Preselection and Options Features of the standard type Features of the standard type Ordering examples • ZAPEX ZWN 230 Variant A, prebored, unbalanced Article No.: 2LC0300-5AA11-0AA0 • N-EUPEX A 280 prebored, unbalanced Article No.: 2LC0101-3AB11-0AA0 • N-EUPEX A 280 finished bores, keyway to DIN 6885-1 and set screw ∅ D1 = 60H7 mm, ∅ D2 = 80H7 mm, balanced G16 in accordance with half parallel key standard Article No.: 2LC0101-3AB99-0AA0 L1E +M1J 3 • N-EUPEX A 280 finished bore, keyway to DIN 6885-1 and set screw ∅ D1 = 60H7 mm, ∅ D2 = 80H7 mm, in ATEX variant Article No.:
2LC0101-3AB99-0AA0-Z L1E +M1J +X99 • N-EUPEX A 280 finished bore ∅ D1 = 78P6 mm, with keyway to DIN 6885-1 keyway width JS9, ∅ D2 = 3 inch M7 with keyway to ASME B17.1 Article No.: 2LC0101-3AB99-0AA0-Z L9Y+M7A+L40+L28+M14 plain text info for L9Y: 78 mm The article number can be obtained with the help of PC software X.CAT NG . The coupling can be selected in a product configurator and specified using selection menus. X.CAT NG is available for free downloading at www.siemens.com/couplings The installation CD is also available through your Siemens AG contact.
3/9 Siemens MD 10.1 · 2015 Couplings Features of the standard type All coupling series except ARPEX clamping hubs and FLUDEX with keyway to ASME B17.1 ARPEX clamping hubs FLUDEX couplings with keyway to ASME B17.1 All coupling series with bore diameter - imperial Bore diameter metric in the case of ZAPEX and ARPEX coupling series as well as coupling hubs with applied brake disks or brake drums of the N-EUPEX and RUPEX series Bore diameter metric in the case of the N-EUPEX, RUPEX, N-BIPEX, ELPEX-S, ELPEX-B, ELPEX, FLUDEX coupling series All coupling series except FLUDEX FLUDEX coupling series All coupling series ZAPEX, ARPEX, N-EUPEX, RUPEX, N-BIPEX, ELPEX-S, ELPEX-B and ELPEX coupling series FLUDEX coupling series All series All series FLUDEX couplings