en Overview Overview ■ ■ Thoroughly clean and dry all parts before using for the first time. X “Care and daily cleaning” see page 12 X Fig. A Base unit 1 Ejector button 2 On/Off switch (multi-level) a 0 = Appliance switched off b 1 = Lowest speed c 4 = Highest speed d M = Instantaneous switching Tools Notes: ■ ■ The stirring whisks are not suitable for processing heavy dough. ■ ■ The maximum processing quantity is 500 g of flour and ingredients. Stirring whisks or turbo stirring whisks depending on the model Suitable for sauces, beaten egg whites, mashed potatoes, crиme fraoche, may- onnaise, cream and light dough, e.g. cake mixture.
Kneading hooks Suitable for stiff mixtures such as short- crust pastry, yeast dough and potato dough as well as for mixing heavy mincemeat dough, pasta or bread dough. (highest speed) 3 Mains cable 4 Apertures for inserting the tools a Large aperture (with 4 indentations) b Small aperture Tools 5 Only MFQ22... Stirring whisks (x2) 6 Only MFQ24... Turbo stirring whisks (x2) 7 Kneading hooks (x2) 8 Universal cutter* (separate instruction manual) * Depending on the model With the universal cutter, you can use the appliance at full power. If the universal cutter is not included with the hand blender, it can be ordered from customer service (order no. 12011748). Operation W W Risk of injury!
Do not insert the mains plug until all prepa- rations for working with the appliance are complete and the tools are firmly connected to the base unit. Never reach into the rotat- ing tools. Only use tools of the same type in pairs. Before using for the first time Before the new appliance can be used, it must be fully unpacked, cleaned and checked. X Fig. B 1. Completely unwind the mains cable. 2. Slide the desired tools into the respec- tive suitable apertures until you hear them lock into place. 3. Place the ingredients into a suitable Caution! Never operate a damaged appliance! ■ ■ Remove the base unit and all accesso- ries from the packaging.
■ ■ Remove the packaging material that is present. ■ ■ Check all parts for completeness. X Fig. A ■ ■ Inspect all parts for visible damage. receptacle. 4. Plug into the mains. 5. Immerse the stirring whisks or kneading hooks into the mixture. Hold the bowl firmly with one hand. 11 MFQ2_DE_Update_Turbobesen.indb 11 01.03.2016 11:00:51