VLT ® 2000 Series Installation I Installation guide Following this installation guide the VLT ® 2000 units with built-in compact RFI filter comply with the EMC requirements according to EN 55011 group 1A. I Technical data The technical data on this page only apply to VLT ® 2010, 0.37 kW, VLT ® 2015, 0.55 kW and VLT ® 2020,0.75 kW.with built in compact RFI filter. Cable type: Screened Max. length: 20 m Mains supply: 1 x 220-240 V Clamp to secure cables and cable screen type 195H6129 is delivered with the above units. Motor cable connection: Motor cable connection: Motor cable connection: Motor cable connection: Motor cable connection:
Motor cable and screen is secured in cable relief fitting and the wires are connected in the motor plug. Mains supply connection: Mains supply connection: Mains supply connection: Mains supply connection: Mains supply connection: Cable is secured in cable relief fitting. Earth wire is secured in the earth screw on the frequency converter. 12 MG.20.B6.02 – VLT is a registered Danfoss trademark