VLT ® 2000 Series Installation I Electrical installation (continued) Item 4 Control cables That I have done The cables used for control cables must be screened to comply with the stated EMC emission specifications. Connect the screen from the control cables to terminal 61 (ground). Observe the following max. cross sections for control cables: Mains supply 3 x 380-460 V Mains supply 1 x 220/230/240 V 3 x 208/220/230/240 V VLT 2010 Max. 1.5 mm 2 VLT 2015 Max. 1.5 mm 2 VLT 2020 Max. 1.5 mm 2 VLT 2025 Max. 1.5 mm 2 VLT 2020 Max. 1.5 mm 2 VLT 2030 Max. 1.5 mm 2 VLT 2030 Max. 1.5 mm 2 VLT 2040 Max. 1.5 mm 2 VLT 2040 Max. 1.5 mm 2 VLT 2050 Max. 1.5 mm 2 VLT 2050 Max. 1.5 mm 2 VLT 2060 Max.
1.5 mm 2 L Cable relief fitting 195H6129 8 MG.20.B6.02 – VLT is a registered Danfoss trademark