INSTRUMENTS AND CONTROLS Reset OK will appear and if unsuccessful, TPMS Reset Failed will appear, consult your MG Authorised Repairer. Security Allows personalisation of the speed locking function and unlocking function. Note: TPMS will need to be reset every time the tyres are replaced or the pressures are changed. Speed Locking Note: The TPMS reset menu will only be available when the car is stationary, with the parking brake applied and ignition in position Ⅱ . Press and hold Speed Locking , then select On or Off as required. Select to return to upper level menu. Unlocking Note:
A TPMS reset will be completed after the vehicle has travelled total of 1 hour or more at a road speed greater than 6MPH (10 km/h). Press and hold Unlocking , then select All Doors or Driver Only as required. Select to return to upper level menu. In the Vehicle Options menu, you can configure some features on the following systems or settings. Vehicle Options Prog Wash Wipe Note: The vehicle options menu will only be available when the car is stationary, with the parking brake applied and ignition in position Ⅱ . Enable or disable programmed wash wipe. Press and hold Off or On . Select to return to upper level menu. Please refer to ‘Programmed Wash Wipe’ in this chapter.
Units Sets the units of measurement for consumption and distance. 22