Pausing More App Features While the vacuum-mop is running, press any button on the vacuum-mop to pause it, and then press the button to resume the cleaning. Pressing the button will end the current cleaning task and send the vacuum- mop back to the charging dock. More features are available in the Mi Home/Xiaomi Home app, including selecting areas to clean, zoned cleanup, the clean there function, and setting up restricted areas/virtual walls. Note: Do not pick up or move the vacuum-mop while it is paused, so as to avoid navigation errors that could prevent the vacuum-mop from returning to the charging dock or cause the loss of map. Notes:
· Before using these features, the vacuum-mop must complete the first cleaning to create a map. · The version of the app might have been updated, please follow the instructions based on the current app version. Sleep Mode Updating the Firmware The vacuum-mop will automatically enter sleep mode after it is paused for 10 minutes, and its indicator will go off. To wake it up, press any button on the vacuum-mop. You can update the firmware via the app. Before updating, make sure the vacuum-mop is on the charging dock and has at least 15% battery left. Note: If the sleep time exceeds 12 hours, the vacuum-mop will be turned off automatically.
Restarting the Vacuum-mop Spot Clean Mode If the vacuum-mop stops responding or cannot be turned off, press and hold down the button for 15 seconds to forcefully turn it off. Then press and hold the button for 3 seconds to turn the vacuum-mop on. When the vacuum-mop is in standby mode or paused, press and hold the button for 3 seconds to start Spot Clean mode. In this mode, it will clean a square-shaped area of 1.5 Ч1.5 meters directly around the vacuum- mop. When the spot cleaning is done, the vacuum-mop will automatically return to its original location and shut off. 11