Restoring Factory Settings Using the Mopping Function If the vacuum-mop does not function properly after being restarted, use a pin to press the reset button until you hear a voice saying "Restoring factory settings". This will reset the vacuum-mop to its original factory settings. 1. First dampen the mop pad and wring out excess water. Next, slide the edge of the middle part of the mop pad into the middle slot of the water tank, and then slide the edges on both ends of the mop pad into the slots on both sides of the water tank. Lastly, press the pad firmly onto the velcro to attach it to the water tank. ① ② ③ ④ Resetting Consumables 2.
Open the water tank lid, fill the tank with water, then securely close the lid. Open Mi Home/Xiaomi Home app, select Mi Robot Vacuum-Mop 2 Ultra and then tap " " to open the setting in the top right corner. Select Consumables and choose the accessory you want to reset, then follow the instructions in the app to complete the resetting. CAUTION: · Do not add hot water to the water tank, as this may cause the tank to become deformed. · To avoid clogging, do not add any cleaning agents or disinfectants to the water tank. 12