Charge the vacuum-mop Connect with Mi Home/Xiaomi Home App Place the vacuum-mop onto the charging dock. The vacuum-mop will automatically turn on and begin charging. The indicators of buttons and on the vacuum-mop will slowly blink white while charging, and remain lit once fully charged. This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi Home app to control your device, and to interact with other smart home devices. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/ Xiaomi Home" in the app store to download and install it.
After 10 minutes of the full charge of the battery, the indicator goes off. 84B2B115 Open Mi Home/Xiaomi Home app, tap " " on the upper right, and then follow prompts to add your device. Battery Level Indicator * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. White: Battery level is more than 15% Orange: Battery level is less than 15% Notes: · Only 2.4 GHz Wi-Fi networks are supported. · The version of the app might have been updated, please follow the instructions based on the current app version. Reset Wi-Fi Notes:
When there is a connection loss between your phone and the vacuum-mop due to the router reconfiguration, wrong password or so, please open the cover of the vacuum-mop so that you can see the Wi-Fi indicator. Simultaneously press and hold the buttons and until you hear a voice saying "Waiting for the network configuration". Once the Wi-Fi indicator is slowly blinking, the Wi-Fi has been successfully reset. · Fully charge the vacuum-mop before using it for the first time. · To ensure safety while charging and to prevent the mop pad from damaging floor surfaces, please remove the mopping assembly prior to charging. 9