Installation How to Use 5. Start Cleaning Turn On/Off Once the power indicator of the vacuum-mop changes from pulsing white to solid white, it is fully charged. Press the buton , or you can use the Mi Home/Xiaomi Home app to start cleaning. Press and hold the buton to turn on the vacuum-mop. Once the power indicator turns solid white, the vacuum-mop is in standby mode. To turn off the vacuum-mop, press and hold the buton while the vacuum-mop is stationary. Turning off the vacuum-mop will end the current cleaning task. Note: The mop pad should be cleaned afer every 30 minutes of use to ensure adequate water flow and cleaning effectiveness. Note: The vacuum-mop cannot be turned off while charging.
6. Remove the Mopping Module Cleaning Press the buton to start cleaning. Press any buton to pause during cleaning. Afer the vacuum-mop finishes cleaning and returns to the charging dock, press the side clips of the mopping module inward and pull to remove the module. Note: When the vacuum-mop is charging or not in use, remove the mopping module, pour out all remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors. Note: The vacuum-mop cannot start cleaning if the batery level is low. Please recharge it before cleaning. If the vacuum-mop starts running low on batery during a cleaning task, it will automatically return to the charging dock to recharge.
Once the vacuum-mop is fully recharged, it will resume cleaning where it lef off. Please tidy up any cables on the floor before cleaning (including the charging dock power cable) to prevent the vacuum-mop from geting caught on them, which could accidentally shut off electrical appliances or cause damage to objects or cables. By default, if the vacuum-mop completes a cleaning task in less than 10 minutes, it will clean the area a second time. Charging Auto mode: The vacuum-mop will automatically return to the charging dock to recharge afer it finishes cleaning. Manual mode: When the vacuum-mop is paused, press the buton to send it back to the charging dock.
The indicator of the buton is pulsing when the vacuum-mop is charging. Pulsing orange: Batery level is less than 15%. Pulsing white: Batery level is more than 15%. Note: The vacuum-mop will automatically return to its original cleaning position if it cannot locate the charging dock. If this happens, please manually place the vacuum-mop onto the charging dock. 9