Side Brush 2. Clean and dry the mop pad. 1. Flip the vacuum-mop over, then gently pull out the side brush as shown in the diagram below to clean it. 2. Reinstall the side brush. Note: Remove the pad from the mopping module before cleaning it, and make sure dirty water does not flow back into the water outlet to avoid clogging. Do not press too hard on the mop pad, as this can hinder its performance. Pad should be cleaned before each use. It is recommended to change the mop pad every 3 to 6 months. Note: It is recommended to clean the side brush monthly and replace every 3 to 6 months. Mop Pad 1. Pull the mop pad off of the mopping module to remove it. Note:
The mop pad should be cleaned afer each use. 14