Care & Maintenance Washable Parts Wi-Fi Status & Indicator Description The parts listed below can be cleaned with a sof cloth or sponge using water or neutral detergent. Reseting Wi-Fi Connection Simultaneously press and hold the butons and . Once you hear a long beep, the Wi-Fi connection has been reset successfully and then the fan is awaiting a connection. The Wi-Fi connection needs to be reset on the circumstances listed below. Front Grille Fan Blade Assembly Rear Grille 11 12 13 Rear Grille Knob ５ The Mi account that the fan is paired with has been changed. Note: Before cleaning the parts, stop and unplug the fan. Then disassemble the fan base first.
When assembling the fan, make sure all parts are completely dry and the fan base is installed last. Avoid direct sunlight. The router that the fan is connected to has been changed. The account or password of the router that the fan is connected to has been changed. Not Washable Parts Enabling/Disabling Wi-Fi Connection The Mi Home/Xiaomi Home app is unable to control the fan. Simultaneously press the butons and when the fan is working, the Wi-Fi connection is disabled and the fan is turned off. When the fan is turned on, the Wi-Fi connection is enabled automatically.
Child Lock Function 4 3 Charging Base 9 To disable the function of child lock, go to the page of Mi Smart Standing Fan 2 in the Mi Home/Xiaomi Home app, or simultaneously press and hold the butons and until you hear a long beep. Fan Blade Assembly Knob Fan Base １ Note: Reseting the Wi-Fi connection or unplugging and plugging in the fan again can also disable this function. Note: Do not rinse the parts listed above with water. Do not use thinner, gasoline, detergent or alkaline detergent to clean any parts. Motor & Stand 9 Wi-Fi Status Awaiting Connection Connecting Connected Fail to Connect Indicator Blinking orange Blinking blue Blue Orange