7 How to Use Charging Not connecting to a power outlet · It is recommended to fully charge the fan before use. Fan Status Batery Level Batery Level Indicator · Connect the charging base to the charging port on the botom of the 30–100% White On 1–30% Orange fan base, then plug in the charging base. Off (The fan will · When the batery level indicator is blinking, the fan is successfully 0% automatically turn off) connected to the charging base. Off 0–100% Off · You can use this fan by either connecting to a power outlet or not. Turning On/Off The fan is equipped with a built-in Wi-Fi module, and energy consumption occurs even when it is turned off.
Fully charge the Turning On fan then turn it off, the batery can last for approximately 2 days. To maintain optimal batery performance, it is recommended to Press the buton to start the fan. When turned on for the first tim keep charging the fan if it is not in use. the default speed is slow (1) and the mode is direct breeze. Turning Off Press the buton to stop the fan while it is running. Switching Speed/Mode Switching Speed Press the buton to adjust the speed, and the corresponding indicators will light up (see table below). Afer the fan is turned off and turned back on again, the speed will be the last used one.
Speed Slow (1) Medium (2) Fast (3) Turbo (4) Connecting to a power outlet Fan Status Batery Level Batery Level Indicator Indicator ≤30% Blinking orange On/Off 30–100% Blinking white 100% Off Note: means the indicator is on; means the indicator is off. Fan Status Batery Level Batery Level Indicator On/Off ≤30% Blinking orange 30–100% Blinking white 100% Off Fan Status Batery Level Batery Level Indicator On 30–100% White 1–30% Orange 0% Off (The fan will automatically turn off) Off 0–100% Off Speed Slow (1) Medium (2) Fast (3) Turbo (4) Indicator