MicroHAWK_Accessory_Installation_Guide_EN_201912_VS100-E-01 (EN)

MicroHAWK Optics and Lighting Accessory Kit Installation Guide This guide contains instructions for how to install the optical accessories on a MicroHAWK ID/MV-20, V/F320-F, V/F330-F, V/F420-F and V/F430-F. Contents 1. MicroHAWK ID/MV-20 Diffuser and Polarizer Kit Installation 2. MicroHAWK V/F3XX-F Diffuser and Polarizer Kit Installation 3. MicroHAWK V/F4XX-F Window and LED Kit Installation 4. MicroHAWK V/F4XX-F With Ring Light Window and LED Kit Installation 5.

MicroHAWK V/F4XX-F Polarizer Kit Installation MicroHAWK Optics and Lighting Accessory List Type Description Kit Part Number ID/MV-20 Window Kits Kit, Diffuser, MicroHAWK ID/MV-20 98-9000077-01 Kit, Polarizer, MicroHAWK ID/MV-20 98-9000062-01 V/F330-F and V/F320-F Window Kits Kit, Diffuser, MicroHAWK V/F330 V330-AF1 Kit, Polarizer, MicroHAWK V/F330 V330-AF2 V/F430-F and V/F420-F Window Kits Kit, Window, V/F4XX V430-AF0 Kit, Diffuser, V/F4XX V430-AF1 Kit, Polarizer, V/F4XX V430-AF2 Kit, YAG Filter, V/F4XX V430-AF4 Kit, ESD Window, V/F4XX V430-AF5 Kit, Red Filter, V/F4XX V430-AF6 Kit, Blue Filter, V/F4XX V430-AF7 V/F430-F and V/F420-F LED Kits Kit, Red LED, V/F4XX V430-ALR Kit, White LED, V/F4XX V430-ALW Kit, Blue LED, V/F4XX V430-ALB Kit, IR LED, V/F4XX V430-ALI V/F430-F With Ring Light Window Kits Kit, Window, RING LT, F/V430 V430-AF0R Kit, Diffuser, RING LT, F/V430 V430-AF1R Kit, Polarizer, RING LT, F/V430 V430-AF2R V/F430-F With Ring Light LED Kits Kit, Red LED, RING LT, F/V430 V430-ALRR Kit, White LED, RING LT, F/V430 V430-ALWR Kit, Blue LED, RING LT, F/V430 V430-ALBR Kit, IR LED, RING LT, F/V430 V430-ALIR

Стр. 2

MicroHAWK ID/MV-20 Diffuser and Polarizer Installation Diffuser Kit Hardware, MicroHAWK ID/MV-20 Diffuser Kit Installation, MicroHAWK ID-20/MV-20 Step 1: Peel the protective liner from the adhesive on the diffuser. Step 2: Rest the narrow edge of the diffuser on the bottom edge of the window opening at an angle as shown below. Step 3: Center the diffuser left-to-right in the window opening. Step 4: Affix the diffuser to the window. Step 5: Run your finger over the surface of the diffuser using light pressure to complete the bond. Qty Description Kit Part Number 1 Kit, Diffuser, MicroHAWK ID/MV-20 98-9000077-01

Стр. 3

Polarizer Kit Hardware, MicroHAWK ID-20/MV-20 Polarizer Kit Installation, MicroHAWK ID-20/MV-20 Step 1: Peel the protective liner from adhesive on the polarizer. Step 2: Rest the narrow edge of the polarizer on the bottom edge of the window opening at an angle as shown below. Step 3: Center the polarizer left-to-right in the window opening. Step 4: Affix the polarizer to the window. Step 5: Run your finger over the surface of the polarizer using light pressure to complete the bond. Qty Description Kit Part Number 1 Kit, Polarizer, MicroHAWK ID/MV-20 98-9000062-01

Стр. 4

MicroHAWK V/F320 and V/F330 Diffuser and Polarizer Installation Diffuser Kit Hardware, MicroHAWK V/F330 and V/F320 Diffuser Kit Installation, MicroHAWK V/F330 and V/F320 Step 1: Follow same steps as above for the ID/MV-20 Note: Take care to align the Diffuser so that the narrow edge is at bottom, that there is an equal gap laterally, and that the bottom edge is aligned with bottom edge of window. . Polarizer Kit Hardware, MicroHAWK V/F330-F and V/F320-F Polarizer Kit Installation, MicroHAWK V/F330 and V/F320 Step 1: Follow same steps as above for the ID/MV-20 Note:

Take care to align the Polarizer so that the narrow edge is at bottom, that there is an equal gap laterally, and that the bottom edge is aligned with bottom edge of window. Qty Description Kit Part Number 1 Kit, Diffuser, MicroHAWK V/F330 V330-AF1 Qty Description Kit Part Number 1 Kit, Polarizer, MicroHAWK V/F330 V330-AF2

Стр. 5