3. Open the display fully. 4. Slide off the two plastic hinge covers about 5 mm, then lift them off. Use your finger or a small tool to push outward next to the hinge. 5. Pry out and pop up the right end of the icon window cover at the plug-in module slot, then pop off the cover. Icon Window Cover Hinge Cover (2) Screw Cover (2) Figure 2-9. Removing the Hinge Covers and Icon Window Cover 6. Pry off the two screw covers by the hinges (use a pointed knife or probe), then remove the two screws. For a 12-inch display, pry off the two display bumpers at the top of the display, then remove the two additional screws. HP OmniBook 2100/3000/3100 Removal and Replacement 2-13