HP — 21ref en

Making Connections Using PC Cards Using PC Cards This section describes how to ♦ Insert a PC Card. ♦ Remove a PC Card. ♦ Find a list of tested PC Cards. To insert a PC Card Note Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0, make sure you’ve installed Card Executive (see page 6-21 for instructions). The OmniBook PC Card slots are available for storing data and expanding the communication capabilities of the OmniBook. You can use two Type II cards or one Type III card. The lower card slot (slot zero) supports zoomed video, which allows high-quality multimedia presentations. 1. Be sure the eject buttons have been pushed in, flush with the case of the OmniBook.

2. Hold the card with its face up and its connector holes toward the card slot. 3. Slide the PC Card into the slot until it is flush with the OmniBook. 4-15